Toshiba e-studio1105, Operating Instructions Manual, Page: 316 / 396

• Front Side (Slow Paper Feed Speed)
• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.1 mm
The default setting is "0" mm.
• Back Side (Slow Paper Feed Speed)
• Max.: 2.0 mm
• Min.: -2.0 mm
• Step: 0.1 mm
The default setting is "0" mm.
• If sheets are delivered face down, turn them over horizontally and check the image position.
• You can also use Frame Image to adjust image position: under [Select Test Pattern for image Position
Adjustment], select [Frame Image].
0104: Adjust Magnification Across Feed Direction
Make the magnification ratio adjustment with more precision than can be done using the normal print
setting. Press [+] to increase the magnification ratio, or [-] to decrease it.
• Front Side
• Max.: 0.3 %
• Min.: -0.3 %
• Step: 0.1 %
The default setting is "0" %.
• Back Side
• Max.: 0.3 %
• Min.: -0.3 %
• Step: 0.1 %
The default setting is "0" %.
0105: Adjust Magnification With Feed Direction
Use this to make the magnification ratio adjustment with more precision than can be done using the
normal print setting. Press [+] to increase the magnification ratio, or [-] to decrease it. Note however
that, the magnification adjustment setting for the back side is applied only if the copy paper's length
(along the feed direction) is 330 mm (13.3 inches) or more.
• Front Side
• Max.: 0.3 %
8. Appendix
314
8