Home
/
Toshiba
/
e-studio1105
/
Operating Instructions Manual

Toshiba e-studio1105, Operating Instructions Manual, Page: 176 / 396

Share

Page: 176 / 396

Toshiba e-studio1105 Operating Instructions Manual Download Page 176

• For details about the settings, see Web Image Monitor Help on the supplied CD-ROM.

• p.139 "Using Web Image Monitor"

Format of On-demand E-mail Messages

To use mail notification, you need to send an on-demand e-mail message to this machine.
Using your mail software, enter the following:

Item

Description

Subject (Referred to as Subject)

Enter “requeststatus”.

From (Referred to as From)

Specify a valid mail address. The device
information will be sent to the address specified
here.

• A mail message must be within 1 MB in size.
• E-mail may be incomplete if sent immediately after power on.
• The subject is not case sensitive.
• The body of a request e-mail has no meaning. Any text written in the e-mail body is ignored.

5. Monitoring and Configuring the Printer

174

5

«
...
174
175
176
177
178
...
»

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments