manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 340 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 340

• Min.: -3.0 mm
• Step: 0.2 mm

The default setting is "0" mm.

• Other Paper Sizes

• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.2 mm

The default setting is "0" mm.

0505: Adjust Letter Fold-out Position 2

Adjust the overall fold size (L2) of letter fold-out sheets when using the optional Multi-Folding Unit.
When you specify multifold, you cannot change the overall size of the folds. Any adjusted settings
will be cleared if you press [OK] when prompted to select multifold.
The   mark indicates the leading edge (relative to the paper feed direction), and the   mark indicates
the trailing edge.

BRU045D

S2

S1

L1

L2

Paper feed direction

• A3 

• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.2 mm

The default setting is "0" mm.

• B4 JIS 

• Max.: 4.0 mm
• Min.: -4.0 mm
• Step: 0.2 mm

The default setting is "0" mm.

• A4 

8. Appendix

338

8

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments