manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 279 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 279

8.

Press the protocol which is not currently selected.

A confirmation message appears.

9.

Press [Yes].

10.

Press [OK].

11.

Press [Exit].

12.

Press the [User Tools] key.

• To delete the name, key display and title, see "Registering Names".

• p.254 "Registering Names"

Registering a FTP Folder

This section describes how to register a FTP folder.

1.

Press the [User Tools] key.

2.

Press [System Settings].

3.

Press [Administrator Tools].

4.

Press [Address Book Management].

5.

Check that [Program / Change] is selected.

6.

Select the name whose folder you want to register.

You can search by the registered name, folder name, and e-mail address.

Registering Folders

277

6

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments