manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 182 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 182

bonjour

Use the "bonjour" command to display Bonjour-related settings.

View settings

Bonjour settings are displayed.

msh> bonjour

Bonjour service name setting

You can specify the Bonjour service name.

msh> bonjour cname "computer name"

• The computer name can be entered using up to 63 alphanumeric characters.
• If you do not specify a character string, the current setting is displayed.

Bonjour Installation location information setting

You can enter information about the location where the printer is installed.

msh> bonjour location "location"

• Information about location can be entered using up to 32 alphanumeric characters.
• If you do not specify a character string, current setting is displayed.

Setting order of priority for each protocol

• msh> bonjour diprint [0-99]
• msh> bonjour lpr [0-99]
• msh> bonjour ipp [0-99]

You can specify the order of priority for "diprint", "lpr", and "ipp". Smaller numbers indicate higher
priority.

IP TTL setting

msh> bonjour ip ttl [1-255]

You can specify the IP TTL (the number of routers a packet can pass through).

• The default is 255.

Resetting the computer name and location information

You can reset the computer name and location information.

msh> bonjour clear {cname|location}

• cname: Reset the computer name. The default computer name will be displayed when the

computer is restarted.

• location: Reset the location information. The previous location information will be deleted.

Interface configuration

msh> bonjour linklocal "interface_name"

5. Monitoring and Configuring the Printer

180

5

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments