manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 183 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 183

• If you do not specify an interface, the Ethernet interface is selected automatically.
• If many types of interface are installed, configure the interface that communicates with linklocal

address.

• If you do not specify an interface, the Ethernet interface is automatically selected.

Interface

Interface configured

ether

Ethernet interface

Setting IPP-SSL printing

msh> bonjour ippport {ipp|ssl}

• If IPP-SSL Printing is set to ssl, the IPP port number will appear as 443, and IPP-SSL printing can

be performed with higher security.

• If IPP-SSL Printing is set to ipp, the IPP port number will appear as 631. Port 631 is the port for

normal IPP printing.

devicename

Use the "devicename" command to display and change the printer name.

View settings

msh> devicename

Printer name configuration

msh> devicename name "string"

• Enter a printer name using up to 31 alphanumeric characters.
• Set single names for each printer.

Printer name initialization

msh> devicename clear name

• Reset the printer name to its default.

dhcp

Use the "dhcp" command to configure DHCP settings.

View settings

The following command displays the current DHCP settings.

msh> dhcp

Remote Maintenance by telnet

181

5

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments