manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 302 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 302

2.

Press [System Settings].

3.

Press [Administrator Tools].

4.

Press [Address Book: Program / Change / Delete Group].

5.

Check that [Program / Change] is selected.

6.

Press the group key you want to register or enter the registered number using the number
keys.

You can search by the registered name, folder name, and e-mail address.

7.

Press [Protection].

8.

Press [Folder Destination] right "Protection Object".

9.

Press [Change] right "Protection Code".

10.

Enter a protection code using the number keys, and then press the [ ] key.

11.

Press [OK].

12.

Press [Exit].

13.

Press the [User Tools] key.

• Specify a protection code of up to eight digits. You can also specify "Protection" without specifying a

protection code.

• To change the protection code settings, repeat step 3 to 11.

6. Registering Addresses and Users for Scanner Functions

300

6

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments