manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 305 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 305

• When [Do not Specify] is selected for LDAP Authentication, the User Name and Password that you

have specified in Program / Change LDAP Server of Administrator Tools settings applies. For details,
see "Programming the LDAP server".

1.

Press the [User Tools] key.

2.

Press [System Settings].

3.

Press [Administrator Tools].

4.

Press [Address Book Management].

5.

Check that [Program / Change] is selected.

6.

Press the name you want to register or enter the registered number using the number keys.

You can search by the registered name, folder name, and e-mail address.

7.

Press [Auth. Info], and then press [ Next].

8.

Press [Specify Other Auth. Info] right "LDAP Authentication".

9.

Press [Change] right "Login User Name".

10.

Enter the login user name, and then press [OK].

11.

Press [Change] right "Login Password".

12.

Enter the password, and then press [OK].

13.

Enter the password again to confirm, and then press [OK].

Registering SMTP and LDAP Authentication

303

6

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments