manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 107 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 107

• Properly shielded and grounded cables and connectors must be used for connections to a host

computer (and/or peripheral) in order to meet emission limits.

1.

Connect the USB2.0 interface cable to the USB2.0 port.

CCJ004

2.

Connect the other end to the USB2.0 port on the host computer.

• This machine does not come with a USB interface cable. Make sure you purchase the appropriate

cable for the machine and your computer.

• The USB2.0 interface board is supported by Windows 2000/XP/Vista/7, Windows Server

2003/2003 R2/2008, Mac OS X 10.3.3 or higher.

• For Mac OS:

To use Macintosh, the machine must be equipped with the optional PostScript 3 unit. When used
with Mac OS X 10.3.3 or higher, a transfer speed of USB2.0 is supported.

• For details about installing the printer driver, see "Preparing the Machine", Printer Reference.

Connecting to the Interfaces

105

3

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments