manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 230 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 230

Waiting for Job Suspension

The machine is waiting for Job Suspension.

Warming Up...

The machine is warming up.

• Check the error contents that may be printed in the configuration page.

Printer Configuration

You can check the printer configuration using telnet.
This section explains the checking procedure for input/output tray and printer language.

• UNIX: Use the “info” command and “rsh”, “rcp”, “ftp”, and “sftp” parameters.
• mshell: Use the “info” command.

Input Tray

Item

Description

No.

ID number of the paper tray

Name

Name of the paper tray

Page Size

Size of paper loaded in the paper tray

Status

Current status of the paper tray

• Normal: Normal
• NoInputTray: No tray
• PaperEnd: No paper

Output Tray

Item

Description

No.

ID number of the output tray

Name

Name of the output tray

5. Monitoring and Configuring the Printer

228

5

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments