manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 64 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 64

ADF Original Table Elevation

• The main machine follows the values that are set in it. The set values of the sub-machines do not

affect the connect copy.

System Status/Job List Display Time

• The main and sub-machines follow their respective set values.

Timer Settings

How the defaults in the Timer Settings of copying of the main and sub-machines are used in connect copy
will be explained.
Only the functions described in this section affect the Connect Copy function.

Auto Off Timer

• The main machine follows the values that are set in it. The set values of the sub-machines do not

affect the connect copy.

Energy Saver Timer

• The set values of the main and sub-machines do not affect the connect copy.
• In Connect Copy mode, neither machine will enter Energy Saver modes (Low Power mode, or

Energy Saver mode).

Panel Off Timer

• The set values of the main and sub-machines do not affect the connect copy.
• In Connect Copy mode, neither machine will enter Energy Saver modes (Low Power mode, or

Energy Saver mode). When the preset time elapses after the connect copy is cleared, the
machines will transit to the power saving status.

Copier / Document Server Auto Reset Timer

• The set values of the main and sub-machines do not affect the connect copy.

Weekly Timer Code

• The set values of the main and sub-machines do not affect the connect copy.
• If the sub-machine is off when the timer code has to be entered, turn on the sub-machine and

enter the code. Connect Copy is not possible if the sub-machine is off.

Weekly Timer: Monday-Sunday

• The set values of the main and sub-machines do not affect the connect copy.
• In Connect Copy mode, Weekly timer settings on the sub-machine will be disabled.

1. System Settings

62

1

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments