Home
/
Toshiba
/
e-studio1105
/
Operating Instructions Manual

Toshiba e-studio1105, Operating Instructions Manual, Page: 374 / 396

Share

Page: 374 / 396

Toshiba e-studio1105 Operating Instructions Manual Download Page 374

• This product includes software developed by Jonathan Stone and Jason R. Thorpe for the NetBSD

Project.

• This product includes software developed by the University of California, Lawrence Berkeley

Laboratory and its contributors.

• This product includes software developed by Christos Zoulas.
• This product includes software developed by Christopher G. Demetriou for the NetBSD Project.
• This product includes software developed by Paul Kranenburg.
• This product includes software developed by Adam Glass.
• This product includes software developed by Jonathan Stone.
• This product includes software developed by Jonathan Stone for the NetBSD Project.
• This product includes software developed by Winning Strategies, Inc.
• This product includes software developed by Frank van der Linden for the NetBSD Project.
• This product includes software developed for the NetBSD Project by Frank van der Linden.
• This product includes software developed for the NetBSD Project by Jason R. Thorpe.
• The software was developed by the University of California, Berkeley.
• This product includes software developed by Chris Provenzano, the University of California, Berkeley,

and contributors.

Sablotron

Sablotron (Version 0.82) Copyright (c) 2000 Ginger Alliance Ltd. All Rights Reserved.
a) The application software installed on this product includes the Sablotron software Version 0.82
(hereinafter, "Sablotron 0.82"), with modifications made by the product manufacturer. The original code
of the Sablotron 0.82 is provided by Ginger Alliance Ltd., the initial developer, and the modified code of
the Sablotron 0.82 has been derived from such original code provided by Ginger Alliance Ltd.
b) The product manufacturer provides warranty and support to the application software of this product
including the Sablotron 0.82 as modified, and the product manufacturer makes Ginger Alliance Ltd., the
initial developer of the Sablotron 0.82, free from these obligations.
c) The Sablotron 0.82 and the modifications thereof are made available under the terms of Mozilla Public
License Version 1.1 (hereinafter, "MPL 1.1"), and the application software of this product constitutes the
"Larger Work" as defined in MPL 1.1. The application software of this product except for the Sablotron
0.82 as modified is licensed by the product manufacturer under separate agreement (s).
d) The source code of the modified code of the Sablotron 0.82 is available at: http://support-
download.com/services/device/sablot/notice082.html
e) The source code of the Sablotron software is available at: http://www.gingerall.com
f) MPL 1.1 is available at: http://www.mozilla.org/MPL/MPL-1.1.html

8. Appendix

372

8

«
...
372
373
374
375
376
...
»

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments