Toshiba e-studio1105 Operating Instructions Manual Download Page 62

Page: 62 / 396

To change the realm name, press [Change] right "Realm Name".

Enter the realm name, and then press [OK].

You can enter a realm name using up to 64 characters.

10.

To change the KDC server name, press [Change] right "KDC Server Name".

11.

Enter the KDC server name, and then press [OK].

You can enter a KDC server name using up to 64 characters.

12.

To change the domain name, press [Change] right "Domain Name".

13.

Enter the domain name, and then press [OK].

You can enter a domain name using up to 64 characters.

14.

Press [OK].

15.

Press [Exit].

16.

Press the [User Tools] key.

Deleting the Realm

This section describes how to delete the programmed Realm.

Press the [User Tools] key.

Press [System Settings].

Press [Administrator Tools].

Press [ Next].

Press [Program / Change / Delete Realm].

Press [Delete].

Select the realm you want to delete.

Press [Yes].

Press [Exit].

10.

Press the [User Tools] key.

1. System Settings

Summary of Contents for e-studio1105












































































































































































































































































































































































































Search results

Summary of Contents for e-studio1105

Reviews:

Toshiba e-studio1105, Operating Instructions Manual, Page: 62 / 396

Search results

Summary of Contents for e-studio1105

Reviews: