manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 289 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 289

2.

Press [System Settings].

3.

Press [Administrator Tools].

4.

Press [Address Book Management].

5.

Check that [Program / Change] is selected.

6.

Select a user of the folder you want to delete.

Press the name key, or enter the registered number using the number keys.
You can search by the registered name, folder name, and e-mail address.

7.

Press [Folder].

8.

Press the protocol which is not currently selected.

A confirmation message appears.

9.

Press [Yes].

10.

Press [OK].

11.

Press [Exit].

12.

Press the [User Tools] key.

• To delete a name entirely, see "Registering Names".

• p.254 "Registering Names"

Registering Folders

287

6

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments