Toshiba e-studio1105 Operating Instructions Manual Download Page 65 | Manualshive

Page: 65 / 396

Toshiba e-studio1105 Operating Instructions Manual Download Page 65

Administrator Tools

How the defaults in the Administrator Tools of copying of the main and sub-machines are used in connect
copy will be explained.
Only the functions described in this section affect the Connect Copy function.

User Authentication Management

• The main machine follows the values that are set in it. The set values of the sub-machines do not

affect the connect copy.

Administrator Authentication Management

• The main machine follows the values that are set in it. The set values of the sub-machines do not

affect the connect copy.

Program / Change Administrator

• The main machine follows the values that are set in it. The sub-machines follows the settings made

on the main machine, regardless of the settings made in it.

External Charge Unit Management

• The main machine follows the values that are set in it. The sub-machines follows the settings made

on the main machine, regardless of the settings made in it.

Enhanced External Charge Unit Management

• The main machine follows the values that are set in it. The sub-machines follows the settings made

on the main machine, regardless of the settings made in it.

AOF (Always On)

• The set values of the main and sub-machines do not affect the connect copy.
• During connect copy, neither the main machine nor the sub-machines is automatically switched

off. Once the connect copy is cleared, the power is cut off as the time period set in "Auto-Off
Time Setting" elapses in accordance with the setting of AOF.

System Settings on Main and Sub-machines

63

1

«
...
63
64
65
66
67
...
»

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments