manualshive.com logo in svg

Toshiba e-studio1105, Operating Instructions Manual, Page: 60 / 396

Share
Download
Toshiba e-studio1105 Operating Instructions Manual Download Page 60

Programming the Realm

This section describes how to specify the Realm settings.
Program the realm to be used for Kerberos authentication.
A realm is the network area in which Kerberos authentication is used. After confirming the network
environment, specify the necessary items.
You can register up to 5 realms.

Programming the Realm

This section describes how to program the Realm.

1.

Press the [User Tools] key.

2.

Press [System Settings].

3.

Press [Administrator Tools].

4.

Press [ Next].

5.

Press the [Program / Change / Delete Realm].

6.

Check that [Program / Change] is selected.

7.

Press [*Not Programmed].

1. System Settings

58

1

Summary of Contents for e-studio1105













































































































































































































































































































































































































Reviews:

No comments