Toshiba E-STUDIO 232 Operator'S Manual Download Page 64

Page: 64 / 354

2.HOW TO MAKE COPIES

1.Setting Originals (Cont.)

Placing originals on the glass

Sheet originals

Do not place heavy objects (4 kg or more) on the original glass and do not press on it with force. Breaking
the glass could injure you.

Raise the original cover or Reversing Automatic Document Feeder
(optional).

• Raise it 60 degrees or more for detecting the original.

Place the original with its face down on
the original glass and align it against the
left rear corner of the glass.

A: Original

Lower the original cover or Reversing
Automatic Document Feeder (optional)
carefully.

• When you want to copy originals with high transparency such as

OHP films or tracing paper, place a blank sheet of paper, the
same size as the original or larger, over the original.

A: Original
B: Blank sheet

Summary of Contents for E-STUDIO 232



































































































































































































































































































































































Search results

Summary of Contents for E-STUDIO 232

Reviews:

Related manuals for E-STUDIO 232

Brands by name

Popular brands

Toshiba E-STUDIO 232, Operator'S Manual

Search results

Summary of Contents for E-STUDIO 232

Reviews:

Related manuals for E-STUDIO 232

Brands by name

Popular brands