Toshiba E-STUDIO 232 Operator'S Manual Download Page 157

Page: 157 / 354

155

Negative/Positive reversal

This function allows you to make copies reversing the contrasting density on the whole face of original.

Place paper in the drawer(s).

• When using this mode in bypass copying, be sure to specify the paper size (

P.92 “1.Paper Selection”).

Place the original(s).

Press the [EDIT] button to enter the edit menu, and then press the
[EDITING] button.

Press the [NEG/POS] button.

• Select other copy modes as required.

Press the [START] button.

Summary of Contents for E-STUDIO 232



































































































































































































































































































































































Search results

Summary of Contents for E-STUDIO 232

Reviews:

Related manuals for E-STUDIO 232

Brands by name

Popular brands

Toshiba E-STUDIO 232, Operator'S Manual

Search results

Summary of Contents for E-STUDIO 232

Reviews:

Related manuals for E-STUDIO 232

Brands by name

Popular brands