Toshiba E-STUDIO 232 Operator'S Manual Download Page 68

Page: 68 / 354

2.HOW TO MAKE COPIES

1.Setting Originals (Cont.)

Single feed mode

To switch over between the continuous feed mode and the single feed mode, see

P.175 “16.ADF /

SADF”.

If there are more originals, set them in the same way.

• The same operation is performed whether or not you press the [YES] button.

After all originals have finished being fed, press the [FINISHED] but-
ton.

If the [FINISHED] button is not pressed, copying is started when the automatic function clear is operated.

P.34 “Clearing functions selected”

Align the side guides to the original
width.

Insert the original with its face up and
straight along the side guides.

• The original will be pulled in automatically. Be sure to let go of it

when it starts being pulled.

• The menu of step 3 will be displayed.

Summary of Contents for E-STUDIO 232



































































































































































































































































































































































Search results

Summary of Contents for E-STUDIO 232

Reviews:

Related manuals for E-STUDIO 232

Brands by name

Popular brands

Toshiba E-STUDIO 232, Operator'S Manual

Search results

Summary of Contents for E-STUDIO 232

Reviews:

Related manuals for E-STUDIO 232

Brands by name

Popular brands