Toshiba E-STUDIO 232 Operator'S Manual Download Page 284

Page: 284 / 354

282

9.BLINKING GRAPHIC SYMBOLS

3.Replace Toner Cartridge Symbol (Cont.)

Open the transfer cover to take out the
transfer charger cleaner from the front
pocket.

Wipe the transfer charger wire properly
with the transfer charger cleaner.

• Insert the transfer charger cleaner into the edge of the transfer

separation unit. Then take it out again after cleaning.

• Press the cleaner against the wall of the next charger and check

if the cleaner pad contacts the wire.

Return the transfer charger cleaner to the
front pocket, and then close the transfer
cover.

Return the automatic duplexer and the
bypass tray to their original position.

Summary of Contents for E-STUDIO 232



































































































































































































































































































































































Search results

Summary of Contents for E-STUDIO 232

Reviews:

Related manuals for E-STUDIO 232

Brands by name

Popular brands

Toshiba E-STUDIO 232, Operator'S Manual

Search results

Summary of Contents for E-STUDIO 232

Reviews:

Related manuals for E-STUDIO 232

Brands by name

Popular brands