泰智科技
Shenzhen Topwisdom Technology Co., Ltd
93
Can’t read the parameters.
Transfer the file invalid.
The Solutions:
Check whether the USB line is connected correctly, and the USB port is connected
the PC.
Check the USB driver is installed correctly.
Check the USB port numbers on the device management, if it’s more than 9,
please change it within 3 – 9.
The software output port need to be same with COM port.
Insert a new and good port on the computer.
Close the equipment power supply 3 minutes, than open again.
Restart the computer, to ground the equipment and the computer.
Replace a computer.
6.4 The Reading and Writing of U disk Question
Q: click the U disk file, show as ―U disk is empty or error‖.
A: U disk error. Check the U disk port is correct. Replace a U disk.
Q: click the U disk file, show as ―U disk reading…please wait‖, the indicator is off.
A: replace the U disk cable.
