泰智科技
Shenzhen Topwisdom Technology Co., Ltd
61
Fig. 4-29
4.4.4 Supplementary Description of Carving
AutoCAD provides the Carving output, which only needs the contour of a drawing
instead of filling, which should be particularly paid attention to.
Please note that for drawings drawn in AutoCAD, the Carving in direct output is carried
out according to the contour, you need not to draw the drawings in the filled mode,
besides, there’s no difference between intaglio and incised inscription, Fig.4-30 shows
the effects of the origin drawing and the drawing after Carving output, as there’s no
difference of intaglio and incised inscription in vector graphics, you may get the effect
of incised inscription by drawing, please see Fig. 4-31 if there’s relation of inclusion
between two outline drawings in the same color, the effect shown in the drawing below
will be created. If multiple layers of drawings in the same color are included, the effect
will be as follows, its rule of Carving output is that: engraving the first layer, not
engraving the next layer, and then engraving the further next layer, and the rest may be
deduced by analogy. Please see Fig. 4-32
scan
drawing graphic
effect
Fig. 4-30
