泰智科技
Shenzhen Topwisdom Technology Co., Ltd
51
Fig. 4-16
Port:
It’s the communication interface between the computer and the equipment,
which is realized via the port, namely, the image information and the equipment
parameters on the computer are transmitted to the equipment via the port. Topwisdom
laser engraving software adopts USB interface or network for the connection with the
computer.
IP:
Set the control card IP.
Netware mode:
use network to communication.
CCD mode:
for Camera cutting control card.
Read:
Read the parameters saved in the equipment and display the values to the user
for reference. If you need to modify the parameters, you must read the parameters in
the equipment or open the parameter files already saved first, and then modify the
parameters (If read failure, please check if computer is connected to control card by
the USB cable or network cable).
Write:
Write the parameter values set by the user into the equipment (authorizing code
provided by the manufacture is required: TZ0001), and then the equipment will operate
according to the parameters written into it. When the parameter settings of the
equipment is not completed, click on this button, and the ―Some Data is Invalidate‖ will
