泰智科技
Shenzhen Topwisdom Technology Co., Ltd
47
Translate Mode:
The communication mode for download file from computer to control
card. If USB mode is selected, it can select the com port in the drop-down
box—corresponding to the visual serial port created in the Device Manager of the
computer. If Netware mode is selected, it can select the IP of the machine you want to
download file to. Or you can set click the
button to add or modify the IP address of
the machine.
If the control card is camera cutting card with the version is
V.L010.XXX, then the CCD Mode check box must be selected. Otherwise, the
output file will not be identified by the card.
Path:
Shortest path:
The program will automatically calculate the shortest cutting path
of the output shapes. The following options can be set.
Work starting pos.:
laser head work starting position (Left-Top, Left-Below,
Right-Top, Right-Below).
Convergence point:
The data handle between ending position of the current
shape and starting position of next shape.
The starting point:
The distance from ending position of current shape to
starting position of next shape is shortest. The free move time is shortest.
Smooth starting point:
Select the optimal starting position of next shape
to realize smooth moving, avoid shake or dislocation
Original starting point:
no change the starting position of the shape.
Sub-layer optimization:
First according to layer order to sort. Then optimize
the cutting order inside the layer.
From the inside out:
If the shapes have the containment relationship, the
inside shape will be cut first. This guarantee will not happen cutting error or
missing cutting.
Original Path:
Not optimize the path, using drawing order.
Hori. Unidirectional:
cutting from one horizontal direction for array process (T
shape).
Bi-level:
cutting from bilateral horizontal direction for array process (S shape).
Row:
When the select the Hor. Unidirectional or Bi-level, it can set the Row
parameter. It means the width of the partition optimization. If you want to cut
the shapes within 100mm range, set the row is 100mm. So the machine will
have cut all the shapes with 100mm row size, then it moves to cut next shape
within next row.
Merge adjacent:
set this merged range so that two line will be merged into a line if
