泰智科技
Shenzhen Topwisdom Technology Co., Ltd
55
Most Speed (mm/s):
The max. speed allowed for single-axis movement. This value
decides the max. Engraving speed and cutting speed.
Stop Speed (mm/s):
The speed of sudden stop during single-axis motion, i.e., the
motion stops speed.
If the stop speed is high, the equipment will get greater impact when stopping and
starting; the effect of engraving will be poor while the engraving efficiency will be high;
Most_Acc( mm/s2):
Max acceleration of the axis, the ratio of change of speed. It is
the ability of speed change from one value to another value in unit time.
The higher the acceleration, the time of the speed from one variable to another is
shorter. And carving efficiency is high, but the impact of the equipment and equipment
abrasion is big;
Otherwise, efficiency is low, the impact of equipment and equipment abrasion is small.
The max acceleration must match the max speed. Then device will work in the best
state (that is, the equipment work with high speed and carved to obtain the very good
effect). In general, the user can set the parameters reasonable according to their
requirement for engraving speed and accuracy.
To meet the accuracy requirement of the user, it can improve the speed and
acceleration to make engraving efficiency.
If speed is now meet the requirements of users, or it was unable to reach the maximum
speed of current Settings, the user can appropriately reduce the speed value. Because
each user's environment and engraving requirement is different, so the device’s max
speed and the max acceleration will also be different. Users can obtain the best
parameters after repeated practice.
Max. Space:
As either the bean or the guide rail has a fixed length, each machine has
a max working breadth (i.e., working range), which limits the motion of the machine
within the max working breadth and makes the trolley and the beam move within the
working range. The trolley and the beam will not hit the machine edge as there’s the
limitation of max space.
4.2.3 Embroidery Import
Embroideries Import is provided for the convenience of the user to import DST, DSB
files of format, the import of CAD files is opened here. Please see the figure below:
