泰智科技
Shenzhen Topwisdom Technology Co., Ltd
42
When finish setting the ReverseRepair, set the appropriate value of max power
and precision. Generally, 60W CO2 laser, 53.5 Focus lens, 350DPI is
recommended. The greater the precision, the longer the engraving time.
IntervalList:
select the UseList check box then the IntervalList setting is applied to the
engraving file. In this case, the ReverseRepair is useless. The function of IntervalList is
similar to the ReverseRepair, use to adjust the engraving effect. In the list of
IntervalList, it can set the backlash in different speed. Because of working in different
speed, the backlash is different. The greater speed, the bigger the backlash.
After the parameter settings, the engraving output can be carried out, the
system will remember the last parameter settings to avoid repeated parameter
settings. For instance, if you set the red output power intensity at (50%, speed at
20%, no error compensation and PRI at 1), the same setting will be applied for
the use of the color red (if any) for the next time.
4.1.2 Coordinate Setting
According to actual situation, just click on the ―Coordinate‖ button in Fig. 4-2 to enter
the menu shown in Fig. 4-7. If the machine homing to the upper right, select Right-Top
in the group of coordinate.
Fig. 4-7
