泰智科技
Shenzhen Topwisdom Technology Co., Ltd
48
they meet the requirements. This is helpful to reduce the nodes within a shape and
make the not closed graph to closed graph.
ClosedRepair:
Set the compensated line length for compensating the process error
leaded by the mechanical parts. This is helpful to make the not closed graph to closed
graph.
Dislocation treatment:
For avoiding closed graph processing dislocation
phenomenon.
Offset repair:
When feeding, material will send partial due to mechanical movement.
Offset repair parameter is used to correct the feeding error. The unit is %, the greater
the value you set, the greater the compensation.
Split feed:
If the graph is so long, it needs to split feed. Set the split length. And the
graph within the split length range will not be split. Make sure the dimension of the
length is not greater than Y, otherwise it will be forced to split. Under the specified
length, cutting out a layout of the graphics, and then feed, and then cutting the next
layout of the graphics. Generally, the split length is length of the longest graphic.
In the bottom of the window, there are some buttons. The description is following:
WorkTime:
Predicting the processing time.
SpeedCorrect:
Click it then it shows a speed setting window. Set the speed limit when
cutting the little graph. It is useful to avoid shake.
Fig. 4-13
