泰智科技
Shenzhen Topwisdom Technology Co., Ltd
58
4.4 CAD Direct Output Software Supplementary Description
4.4.1 The Support of AutoCAD Direct Output Annotation Text
Text and annotations in CAD system are normally exported as auxiliary information,
therefore, in usual cases, you need not select text and annotations in the window
shown in Fig. 4-24. However, in special cases, e.g., the user needs to engrave the text
in the graphics, and even the annotations, for output, you can select corresponding
options in the window shown in Fig. 4-24.
First, you’d like to announce that we do not support text and annotations to a fractional,
however, there are some limitations, for example, we support 5, 6 types of large fonts,
settings for large fonts are as follows: first enter the menu shown in Fig. 4-24, select
Text Style in the ―Format‖ menu.
Fig. 4-24
Then you’ll enter the menu shown in Figure Fig. 4-25, select Use Big Font (U). And
then select the font file you required from the pull-down menu of Big Fonts (B), we
currently supports the following font files for Chinese: Fs.shx, gbcbig.shx, HT.shx,
Hztxt.shx and Khz.shx. So you must select one of the aforesaid files.
