Pay particular attention to the
Screen
page and the
Calibration
page of the Configuration Guide. In both cases you
must complete the information, or tasks, requested of you before you are able to select
Next
.
On the
Screen
page be sure to measure the actual blue lines making up the triangle on the screen with the included ruler on
the side of the Tobii PCEye Go Mounting Guide and fill in their numbers in the spaces provided. Then select Save.
DO NOT attempt to measure the physical screen size of your computer. The numbers of the measured lines from the
triangle will be extrapolated into the size of the physical screen by the software.
On the
Calibration
page, you must calibrate before moving on to the next page. Follow the instructions and select
Calibrate
.
Without calibration, you will be unable to finish the
Configuration Guide
and Gaze Interaction will not work properly on your
computer.
•
Select Finish on the final page of the
Configuration Guide
and your settings and configurations will be saved for future
use.
The
Configuration Guide
will automatically launch if configuration changes to your system have been detected.
All future settings, profile control, and calibrations will be controlled by, and can be accessed from,
Tobii Gaze Interaction
Settings
(see
4 Using the Tobii PCEye Go, page 14
for information about
Tobii Gaze Interaction Settings
)
12
3 Getting Started
Tobii PCEye Go User’s manual v.2.8 - en-US
