7
•
Maintenance and Service
Page 114
Vanquish Diode Array Detectors (VH-D10) Operating Manual
CAUTION—Spraying Solvent
Solvents can spray when under high pressure.
•
Stop the pump flow prior to opening the flow path.
•
Wait until the system pressure is down to zero.
•
When opening the flow path, wear appropriate protective
equipment.
CAUTION—Hot Surfaces
Surfaces inside the detector may become hot during operation. Touching
hot parts might cause burns. Allow hot surfaces to cool down before
starting replacement or maintenance procedures.
CAUTION—Hydrostatic Pressure
Solvent may spill when you open the flow path. This is due to hydrostatic
pressure in the system when the solvent reservoirs are located above
the pump outlet.
Before you loosen a connection in the flow path, turn off the pump flow
and wait until the system pressure is down to zero. Unscrew the caps of
the solvent reservoirs and remove the solvent lines together with the
caps from the reservoirs. Empty the solvents lines. Refer to the
Operating Manual
for the pump. Retighten the reservoir caps.
Summary of Contents for Vanquish VH-D10
