ThermoFisher Scientific Vanquish VH-D10, Operating Manual

Page: 159 / 196

7 • Maintenance and Service
Vanquish Diode Array Detectors (VH-D10) Operating Manual Page 159
NOTICE The packaging for the slide-in module differs from the
packaging for the complete module. Shipping the slide-in module or
the detector incorrectly leads to damage on the device. Always pack
and ship the slide-in module and the detector in the respective,
dedicated packaging.
CAUTION—Possible Contamination
Hazardous substances may have contaminated the device during
operation and may cause personal injury to service personnel.
•
Decontaminate all parts of the device that you want to return for
repair.
•
Fill in and sign the Decontamination Certificate, which is part of the
Service Return Form. Sign the certificate to confirm that the device
has been properly decontaminated and that it is free of hazardous
substances.
• Thermo Fisher Scientific refuses to accept devices for repair if the
Decontamination Certificate is missing.
7.15.2 Installing the Slide-In Module
Parts required
Replacement slide-in module
Tools required
Screwdriver, Torx T20
Preparations
1. Verify that the detector enclosure into which the slide-in module is
installed is clean. If required, clean the inner and outer surfaces of
the enclosure. See the
Cleaning the Detector section
in this
operating manual.
2. When installing the slide-in module to an enclosure in the system
stack, check that the enclosure is placed correctly in the stack.