ThermoFisher Scientific Vanquish VH-D10, Operating Manual

Page: 54 / 196

5 • Installation
Page 54 Vanquish Diode Array Detectors (VH-D10) Operating Manual
5.5.2 Connecting the Detector
Detector Connectors
The following connectors are provided on the detector:
Figure 9: Electrical connectors on the right side of the detector
No. Description
1 Rating plate, indicating the serial number, part number, module name, revision
number (if any), line and fuse rating, and the manufacturer's address
2
3
4 Main power switch (on/off control)
Fuse holder
Power-inlet connector
5 System Interlink port
Allows power on/off control for the detector from the Vanquish system base
and device communication and synchronization between the detector and
other modules in the Vanquish system.
For example, the interconnection between autosampler and detector
automatically enables direct synchronization of sample inject and data
acquisition start in the detector. As a result, the synchronization improves the
retention time reproducibility.