Configuring the Spectra Optia System
48
Spectra Optia Apheresis System Operator’s Manual
Configuring the Spectra Optia System
The Spectra Optia system allows you to configure procedure-independent and procedure-specific operating
parameters to meet your facility’s requirements. Configuration settings for the procedure-independent parameters
apply to all procedures. Configuration settings for procedure-specific parameters apply to only the specified
procedure. Several parameters have a default setting. The system uses the default setting unless you enter a different
setting. You must touch
Confirm
after you finish configuring the parameters to save the settings.
You can configure most procedure-independent operating parameters after you turn on the system and before you
connect the patient except for the language setting, and the inlet pressure and return pressure alarm limits, which
are described in Table 4-2.
You can configure procedure-specific operating parameters after you select the procedure and before you enter and
confirm the patient data.
To configure the parameters, perform the following steps:
1
Touch the
Config
menu button. The configuration tabs appear.
2
Touch the tab for the parameters that you want to configure. The corresponding configuration screen
appears.
3
Touch the button for the parameter that you want to configure:
• For parameters with only two settings, toggle between the settings until the setting that you prefer appears
on the button.
• For parameters with more than two settings, a list appears to enable you to select a setting.
• For parameters that require a numeric setting, a data entry pad appears to enable you to enter a number.
The range of acceptable values appears on the data entry pad.
4
Repeat step 3 until you finish configuring the parameters.
5
Touch
Confirm
.
SpectraOptiaOpsManual.book Page 48 Thursday, May 17, 2018 11:24 AM