Introduction
36
Spectra Optia Apheresis System Operator’s Manual
Buttons, Icons, and Images
The buttons, icons, and images described in Table 2-14 can appear on the monitor or on the screens. They allow
you to operate and adjust the Spectra Optia system during a procedure, or they communicate important
information about the procedure.
Table 2-14:
Buttons, icons, and images
Graphic
Description
Location
Function
Go back button
• Bottom right side of screens
• Top left side of the report
summary screen and the
report detail screen
Returns you to a previous screen or to
the main run screen. The button is active
only when it is safe to return to a
previous screen.
On some screens you must confirm any
data you change before you touch the go
back button, or the data will not be
saved.
(muted)
(muted)
Alarm mute button (Icon on the
button depends on the
software version in use.)
Bottom left side of alarm
screens
Allows you to mute the alarm tone during
an alarm condition. The tone is
automatically restored if another alarm
occurs.
Stop button
Bottom left corner of the
monitor
Stops the centrifuge and pauses the
pumps.
Pause button
Bottom right corner of the
monitor
Pauses the pumps.
Active alarm
button
Bottom left side of the screen
during an alarm condition
Indicates an active alarm. Takes you to
an active alarm screen or to a list of
active alarms, if more than one alarm is
active.
Clock button
• Run time graph on the main
run screen
• Exchange procedures: Run
time graph on the exchange
status screen
Allows you to view clock time or elapsed
time for the run.
Up and down scroll buttons
• Active alarm screens
• Alarm history screen
• Procedure selection screen
Allows you to view additional information
on the screen.
SpectraOptiaOpsManual.book Page 36 Thursday, May 17, 2018 11:24 AM