15
Spectra Optia Apheresis System Operator’s Manual
213
Ending the Run and Completing the Procedure
Starting a New Procedure
Touch
New Procedure
on page 2 of the procedure summary. The system resets so that you can select your next
procedure.
Rinseback
Total volume (mL) of fluid that the return pump processed during rinseback. This does not
include any bolus volume delivered during rinseback.
Run time
Total time (min) that was taken to process inlet volume before the run targets were attained.
This does not include the time to complete rinseback or the time when the inlet pump was
paused.
Saline diverted
Total volume (mL) of saline used to prime the tubing set that was diverted to the saline
container after the run started
Saline rinse
Total volume (mL) of saline that was used for the saline rinse
Saline to patient due to air
removal
Total volume (mL) of saline delivered to the patient due to the system removing air from the
return line
Start time
Time when the operator touched
Start Run
Target Hct
Target Hct (%) for the patient at the end of the run
TBV processed
Total number of patient TBV that were processed
Tubing set
Difference between the volume (mL) of fluid in the tubing set at the start of the run and the
volume in the set at the start of rinseback, or at the end of the run if rinseback is not
performed. A negative value indicates that there is fluid volume in the set.
Volume removed
Total volume (mL) of fluid that the plasma pump processed
Volume replaced
Total volume (mL) of fluid that the replace pump processed. This does not include any bolus
volume or the volume of a saline prime
Whole blood processed
Total volume (mL) of the patient’s blood that the inlet pump processed during the run.
Table 15-1:
Data on the procedure summary screens (continued)
Data
Description
SpectraOptiaOpsManual.book Page 213 Thursday, May 17, 2018 11:24 AM