Spectra Optia Apheresis System Operator’s Manual
43
Installing and Transporting the Spectra Optia System
3
Turning the Spectra Optia System On and Off
1
Confirm that the proper power cord is attached to the system and plugged into an appropriate electrical
receptacle.
2
Press the power switch on the upper-right side of the system to the ON position. The system performs a
series of self-diagnostic tests to validate the functionality of the hardware and software before you begin the
procedure. Once the tests are complete, the buttons on the screen become active and you may begin the
procedure.
3
To turn off the system, press the power switch to the OFF position.
Caution:
When the wheel pedal is not in the locked position (pressed to the right side) and the rear wheel brake levers
are released, ensure at least one person is in continuous contact with and controls the movement of the Spectra Optia
system.
Caution:
Ensure that the wheel pedal is pressed to the right side (locked position) and the rear wheel brake levers are
locked during procedures, so that the Spectra Optia system does not move.
Caution:
Only perform procedures when the system is on a smooth, dry, level surface.
Caution:
Do not leave the device unattended in a traffic area.
SpectraOptiaOpsManual.book Page 43 Thursday, May 17, 2018 11:24 AM