manualshive.com logo in svg

Terumo BCT Spectra Optia Apheresis System, Operator'S Manual, Page: 225 / 310

Share
Download
Terumo BCT Spectra Optia Apheresis System Operator'S Manual Download Page 225

15

Spectra Optia Apheresis System Operator’s Manual

211

Ending the Run and Completing the Procedure

2

Place the tubing into the jaw of the head and squeeze the lever until the jaw is completely closed and the 
indicator light illuminates (Figure 15-2).

Figure 15-2:

Hold the jaw closed until the indicator light illuminates

3

After the indicator light goes off, hold the jaw closed for one second, and then release the lever.

4

Remove the tubing and inspect the integrity of the seal.

5

Put the sealer head back into the holder on the Spectra Optia system.

SpectraOptiaOpsManual.book  Page 211  Thursday, May 17, 2018  11:24 AM

Summary of Contents for Spectra Optia Apheresis System























































































































































































































































































































Reviews:

No comments