Teltonika FMB630, User Manual

Page: 65 / 173

65
Parameter ID
Parameter value Value
type MIN MAX Default Recommended
Server 1
GPRS Context Activation
x240
0 (Disable) 1 (Enable) 0 - S8
Protocol 0 (TCP) 1 (UDP) 0 - U8
Server Response
Timeout
5 300 5 - U16
Domain Empty 56 char Empty - -
Target Server Port 0 65535 0 - U16
Configuring format: <Enable>,<IP>,<port>,<protocol>,<Server Reponse Tmo>
Server 2
GPRS Context Activation
x242
0 (Disable) 1 (Enable) 0 - S8
Protocol 0 (TCP) 1 (UDP) 0 - U8
Domain Empty 56 char Empty - -
Target Server Port 0 65535 0 - U16
Configuring format: <Enable>,<IP>,<port>,<protocol>
GPRS data limit settings (6.3.5.2)
Enable GPRS limits
x241
0 (Disable) 1 (Enable) 0 - U8
Data limit Home 1 10000 100 - U16
Data limit Roaming 1 10000 10 - U16
Configuring format: <Enable>,<Data Limit Home>,<Data Limit Roaming>
SMS security settings (6.3.5.3)
SMS Login x252 Empty 5 char Empty - S8[5]
SMS Password x253 Empty 5 char Empty - S8[5]
Authorized phone
numbers
x260-
x269
Empty 16 char Empty - S8[17]
SMS data sending settings (6.3.5.4)
SMS Data x250 0 (Disable) 1 (Enable) 0 - U8
SMS Data send week
time schedule
x273
Binary
decoding
Binary decoding - -
20 byte
array
Configuring format: <x1><x2><x3><x4>......<x19>
Operator list settings (6.3.5.6)
Preferred Operator x271 0 99999999 0 - U32
Black List Operator x272 0 99999999 0 - U32
Configuring format:
( setparam Y271 X )
X is start position. If no X is set starts from 0
Max 19 operator codes can be set (separated by comma) in one SMS command.
Reading format:
(getparam Y271 X)
X values can be 1,2,3.
If X = 1, Operator codes from 0-19 are read from configuration and sent via SMS.
If X = 2, Operator codes from 20-39 are read from configuration and sent via SMS.
If X = 3, Operator codes from 40-49 are read from configuration and sent via SMS.
If X = any other, Operator codes from 0-19 are read from configuration and sent via SMS
*User must use X, without X value device responds that parameter is wrong or it can
respond with wrong operator codes.
Data Acquisition settings (Chapter 9)
Data acquisition modes
x010
Min Period
(in seconds)
0 9999999 600 - U32
Min Distance
(in meters)
0 65535 0 - U32
Min Angle 0 180 0 - U16