102
RST
Restart Counter
ERR
Error Counter
SR
Number of Sent Records
BR
Number of broken records
CF
Profile CRC Fail counter
FG
Failed GPRS counter
FL
Failed link counter
UT
UPD Timeout counter
P#
Current profile
#;#;#;#;#
# - how many times appropriate profile ( Profile0; Profile1; Profile2;
Profile3; Profile4 ) was loaded
SMS
Sent SMS Counter
NOGPS
No GPS Timer
GPS
GPS receiver state. 0 – OFF, 1 – restarting, 2 – ON but no fix, 3 – ON and
operational, 4 – sleep mode
SAT
Average satellites
RS
Reset Source Identification
RF
Number of records found on FLASH
Answer Example: INI:2007/8/24 10:15 RTC:2007/8/24 12:43 RST:2 ERR:11 SR:182 BR:0 CF:0
FG:0 FL:0 UT:
P:1;0;1;0;0;0 SMS:2 NOGPS:0:0 GPS:3 SAT:7 RS:7 RF:11
14.14
deleterecords
Deletes all saved records from device memory. Device does not send a response back to
the sender.
14.15
readio #
Table 46 readio command response
Response details
Description
ID
IO element ID
Value
IO Element value
Answer Example: IO ID:3 Value:0
14.16
setdigout #### X Y Z W
Sets digital outputs to ON or OFF state.Value is written as a row for OUT1, OUT2, OUT3,
OUT4 values.
Example: ‘setdigout 0010 0 0 5 0’ will set OUT3 to high level for 5 seconds, while OUT1,
OUT3 and OUT4 to low level.
Device Ans example: “DOUTS are set to:0010 TMOs are: 0 0 5 0. Out1 Scenario: Enabled
Out2 Scenario: Disabled"
14.17
getparam ####
Read parameter value. ID consists of 4 digits – first digit identifies profile, second, third and
fourth identifies parameter ID as described in Parameters Configuration chapter 6.3.
