34
6.3
Parameters Configuration
6.3.1
Global parameters Settings
Global parameters do not depend on selected profile; they are common for all profiles. To
configure these parameters choose the TAB named “Global Parameters” and make all necessary
changes (Figure 25)
Figure 25 FMB630 Global parameters
Table 9 Global parameters description
Parameter Name
Parameter description
Profile change on
event
Allows selecting profile switching method. When 'Profile change on
event' is disabled – FMB630 switches profiles depending on GSM
operator code method. Otherwise it switches profiles depending on I/O
events.
Record Settings
Are used to switch between two data sending modes: starting from
newest records or starting from oldest record. Active data link timeout
defines how many seconds should FMB630 keep connection to the
server before disconnecting after successful data transfer. Note that
even if it disconnects from server, it always keep active GPRS session.
Accelerometer
settings
Defines accelerometer how many seconds should movement be
detected by accelerometer in order to set movement for FMB630
application and how many seconds after movement is not detected by
accelerometer FMB630 application should treat like movement is still
there.
Static Navigation
settings
Functionlity filters GNSS data and filters GNSS jums till movement or
ignition detected. Parameter can be enabled or disabled.
GNSS Settings
Allows choosing satellite systems – GNSS(all available), GPS, GLONASS,
GNSS+SBAS, GPS+SBAS.
Network Time
GNSS Settings, where you Enables/Disables time synchronization from
