98
14
SMS COMMAND LIST
SMS commands are used to identify FMB630 current state, possible configuration errors,
perform reset, set parameters, switch on/off outputs, etc.
SMS commands should be sent along with module login and password and sender number
must be entered in the authorized number list (if at least one other number is entered). Please
see SMS settings in Chapter 6.3.5.3 for more details.
SMS structure is as follows:
<login><space><password><space><command>
Example:
opa opa getgps
Table 35 SMS command list and description
Command
Description
Response
getstatus
Modem Status information
Yes
getweektime
Current device time, Day of Week and amount of minutes passed
since start of week
Yes
getops
List of currently used and available GSM operators
Yes
readops#
Emergency gsm operator readout from active profile
# - 1,2,3
1 – operators [1-20]
2 – operators [21-40]
3 – operators [41-50]
Yes
getnmeainfo
Nmea error debug sms
Yes
getcfgtime
Date and Time of last successful configuration
Yes
getgps
Current GPS data and time
Yes
loadprofile#
Load specified profile into RAM Engine Profile. # - number of
profile to load
Yes
cpureset
Reset CPU
No
resetallprof
Reset all FLASH profiles to default profile
Yes
getver
Device / Modem / Code version information
Yes
getinfo
Device runtime system information
Yes
deleterecords Delete all records saved on FLASH
No
getio
Readout digital inputs and outputs, analog inputs
Yes
readio #
Readout input value according entered ID, # - ID value
Yes
setdigout
XXXX Y1 Y2 Y3
Y4
Set digital outputs
0 – OFF, 1 – ON
Y1 – timeout for DO1
Y2 – timeout for DO2
Y3 – timeout for DO3
Y4 – timeout for DO4
Yes
getparam #
Readout parameter value according entered ID.
# - ID value.
Yes
setparam # #
Set parameter value according entered ID and Value.
1.# - ID value.
2.# - New Parameter Value
Yes
