97
13.9.2
Bluetooth Headset
You need to configure FMB630 Bluetooth settings for proper connection to hands-free
adapter. Below are required steps:
1.
Connect FMB630 device to PC using USB cable.
2.
Launch
FM63XX Configurator
and connect to device
.
Figure 79 Bluetooth Settings
Here: 1 Global Parameters; 2 Enable Bluetooth; 3 External Bluetooth device name;
4 Save device configuration; 5 Disconnect device
1.
Select “Global Parameters” settings tab.
2.
Turn on Bluetooth power „Enable (visible)“
3.
Set “Bluetooth name” as your Hands Free device name for proper device identification and
connection to it. In this example Hands Free headset name is „DMH10“but at least 2
characters are needed to recognize it and connect to it. For better and faster adapter
identification in network you could enter a full device name. You could check your Hands Free
adapter Bluetooth name by scanning nearby Bluetooth devices using mobile phone or
computer with Bluetooth adapter.
4.
After all these steps press „Save“to save configuration.
5.
Now you can disconnect device from a configurator.
After device configuration you can connect your Hands Free device to FMB630 device.
Turn on Hands Free device then turn on its Bluetooth connection for pairing following your
model instructions
9
. Hands Free adapter should make a special sound in ear from speaker or its
led identification should change to inform about successful connection
10
. To check if adapter is
successfully connected, call to FMB630 device, Hands Free device should start ringing. If you later
restart FMB630 it will automatically connect to this adapter.
9
Hands Free device Bluetooth connection pairing instructions depends on specific model.
10
Hands Free device notification about paired Bluetooth connection depends on specific model.
