119
0x80
– immobiliser, bit appears during
introduction of a programmed sequence of
keys in the car.
Byte1:
0x01
– the key is in ignition lock
0x02
– ignition on
0x04
– dynamic ignition on
0x08
– webasto
0x20
– car closed by factory's remote control
0x40
– factory-installed alarm system is
actuated (is in panic mode)
0x80
– factory-installed alarm system is
emulated by module
Byte2:
0x01
– parking activated (automatic gearbox)
0x10
– handbrake is actuated (information
available only with ignition on)
0x20
– footbrake is actuated (information
available only with ignition on)
0x40
– engine is working (information available
only when the ignition on)
0x80
– revers is on
Byte3:
0x01
– Front left door opened
0x02
– Front right door opened
0x04
– Rear left door opened
0x08
– Rear right door opened
0x10
– engine cover opened
0x20
– trunk door opened
Byte4:
0x01
– car was closed by the factory's remote
control
0x02
– car was opened by the factory's remote
control
0x03
– trunk cover was opened by the factory's
remote control
0x04
– module has sent a rearming signal
0x05
– car was closed three times by the
factory's remote control
- High nibble (mask 0xF0 bit)
0x80
– CAN module goes to sleep mode
4
Tachograph driver
card presence
1
53
0x00
– No driver card
0x01
– Driver1 card presence
0x02
– Driver2 card presence
0x03
– Driver1 and driver2 cards present
5
Driver 1 states
1
54
0xX0
– break/rest
0xX1
– availability
0xX2
– work
0xX3
– driving
0x0X
– no time-related warning detected
0x1X
– limit #1: 15 min before 4 1/2 h
0x2X
– limit #2: 4 1/2 h reached (continuous driving
time exceeded)
6
Driver 2 states
1
55
