153
Figure 118 RFID Global parameter settings
The difference between RFID Mode and RFID MF7 Mode is that in RFID Mode FMB630
understands RFID messages that are in hexadecimal format and RFID MF7 Mode understands
messages that are in decimal format. For example:
RFID Mode message –
“$aa$02$03$04$17$89$00$01”
RFID MF7 Mode message –
“1213141519”
The chosen mode has to correspond to the RFID reader’s mode. What type of RFID is sent
to FMB630 depends on the reader.
For more information about RFID ID’s and devices, please contact to your local sales
representative.
20
GARMIN
Garmin provides a Fleet Management Interface Tool Kit which connected to FMB630
enables the driver to have a "screen" in their vehicle for real-time navigation, messaging, and job
dispatch capabilities to help them be more efficient.
FMB630 and Garmin operational scheme is shown in Figure 119 below:
Figure 119 Garmin operational scheme
20.1
Supported Garmin FMI Protocols
The following is a list of protocols supported and the corresponding feature/benefit.
FMB630 can fully support Fleet Management Interface (FMI) versions up to 2.1. Other or higher
versions may be supported, but Teltonika is not responsible for the changes made by Garmin,
which may affect the work of FMB630 and Garmin products. For more information about Garmin
