![Teltonika FMB630 User Manual Download Page 138](http://html1.mh-extra.com/html/teltonika/fmb630/fmb630_user-manual_1084774138.webp)
138
Type: Status
Supporting information:
PGN 64977
Note: Firmware captures all values [0x00-0x03].
FMS-standard requests supported:
Status signal which indicates if the FMS Vehicle Interface (FMS Gateway) will respond to requests
from the FMS device for the PGNs listed in the FMS Interface Specification.
This mode is to support FMS gateway devices that only operate in a ‘Request’ mode.
The FMS PGNs may also be broadcast periodically in this mode.
The FMS Gateway will NOT support the requests for information not included in the FMS
Interface Specification onto the vehicle network.”
00 On request mode is not supported
01 On request mode is supported
10 Reserved
11 Don’t care
Data Length: 2 bits
Resolution: 4 states/2 bit, 0 offset
Data Range: 0 to 3 Operational Range: same as data range
Type: Status
Supporting information:
PGN 64977
Note: Firmware captures all values [0x00-0x03].
High resolution total vehicle distance:
Accumulated distance traveled by the vehicle during its operation.
NOTE – See SPN 245 for alternate resolution.
Data Length: 4 bytes
Resolution: 5 m/bit, 0 offset
Data Range: 0 to 21,055,406 km Operational Range: same as data range
Type: Measured
Supporting information:
PGN 65217
Note: Value sent to server is already adjusted with bitgain.
Service distance:
The distance which can be traveled by the vehicle before the next service inspection is required.
A negative distance is transmitted if the service inspection has been passed. The component that
requires service is identified by the service component identification (see SPN 911-913, 1379,
and 1584).
Data Length: 2 bytes
Resolution: 5 km/bit, -160,635 km offset
Data Range: -160,635 to 160,640 km Operational Range: same as data range
Type: Measured
Supporting information:
PGN 65216