Teltonika FMB630, User Manual, Page: 127 / 173

127
Figure 100 ManualCan fuel
16.6 AutoCAN description
AutoCAN function allows user to automatically scan for available messages on CAN
bus and configure CAN data sending to server. In order to configure AutoCAN connect FMB630 to
computer with Port ½ cable. Launch FMB630xx configurator version 1.1.1.7 or higher. Push
“Connect“button, then „CAN“button (Figure 101). CAN configuration menu will be opened.
Figure 101 Entering CAN configuration

SCAN scans once for available messages on CAN bus;

Monitoring – toggles scanning of messages on CAN bus every 3 seconds;

Offline Configuration – enables CAN configuration when FMB630 xx is not connected to
CAN bus;

Auto CAN tab – configure CAN by selecting available messages from CAN bus;

Manual CAN tab – Configure CAN by manually entering CAN message ID and data mask;
Figure 102 CAN configuration menu
16.6.1 Configuration
To start CAN configuration push “SCAN“ button. A table of all available CAN
messages will appear (Figure 100). Description of columns: