TELOS 2101 USER’S MANUAL
PART IV
THE STUDIO INTERFACE & ADDITIONAL HYBRIDS
IV-7
SECTION 1 – STUDIO INTERFACE INSTALLATION
Rear Panel of the 2101 Studio Interface illustrating the various connectors.
Note: The stock Studio Interface includes a single T-Link Interface and a single Desktop
Director Interface. Both AES/EBU and analog outputs are simultaneously active.
1 0
1
2
1
2
A
B
C
D
E
F
RS-232 (DCE)
10 Base-T
SAA 1
SAA 2
Parallel Remote
POH
AES/EBU
IN
OUT
IN
1
1
2
2
T-Link Port
Connects to
2101 Hub
Desktop Director Ports
Each port supports two
Desktop Directors for a
total of four. If more
than two Directors (total)
are to be used a Desktop
Director Power Supply Kit
(Part # 0212-1400) must
be used
Additional Desktop
Director Ports
(Optional)
Part # 2001-00022
allows connection of four
additional Directors for
a maximum of eight.
External Power Supply
Required.
Parallel Port
Control Inputs
(Such as Ring-
mute) & Outputs
T-Link
LOS ALARM
(LED illuminates
if T-Link is lost)
10 Base-T
Ethernet
A LAN Connection
is required
INPUT(Send to Caller OUTPUT (Caller)
Input - Send
to Caller
Hybrids 1 & 2
(Analog)
-7 to +4 (nom)
Output -
From caller
Hybrids 1 & 2
(Analog)
-7 to +8 (nom)
IEC Mains
Power Jack
100-240 VAC
50/60 Hz
Power
Switch
AES/EBU
Output -
From Caller
Dual format
signal with
Hybrid 1 on
Left & Hybrid 2
on Right
Program
on Hold
Input
(Analog)
+4 (nom)
AES/EBU
Input -
Send To Caller
Dual format
signal with
Hybrid 1 on
Left & Hybrid 2
on Right
Second T-Link
Card should be
inserted here
when configuring
dual redundant
systems.
