TELOS 2101 USER’S MANUAL
PART IV
THE STUDIO INTERFACE & ADDITIONAL HYBRIDS
IV-39
SECTION 1 – STUDIO INTERFACE INSTALLATION
w
IMPORTANT TIP!
Assistant Producer for 3.5 is required for use with the Series 2101, earlier Assistant Producer
versions will not work with the system.
h
HOT TIP!
An IP address and Ethernet connection to the 2101 Studio Interface are required.
However, no IP address, or Ethernet connection, is required to the Telos TWO extended
hybrid during normal operation. A connection will be required during software updates
however.
Finally, this port is also used for software upgrades over the Internet. For details see
section 3.3.3.
10 Base-T Ethernet Connector
This is an industry standard 10Base-T Ethernet connector on the usual 8 position/8
pin miniature modular (RJ-45 style) jack.
The 10Base-T connector has two integral LED indicators that can be helpful if
problems are suspected.
The green “Link” LED indicates the presence of a live physical connection to a
working Ethernet hub (or other device). If the green indicator does not light you
should check your network wiring. Absence of the link light could also indicate a
hardware failure of the Studio Interface.
The amber (yellow) “Activity” LED indicates network activity on this segment of the
network. Depending on network activity this indicator may only illuminate
occasionally; flickering of this light is normal.
