Teledyne SierraNet M408, User Manual, Page: 72 / 248

Teledyne LeCroy Trigger Filter Settings in Easy Mode
64 SierraNet M408 User Manual
2.7 Trigger Filter Settings in Easy Mode
Easy mode allows you to operate the analyzer with minimum setup. In this mode, you can
perform only a Trigger and Data capture. Use Easy Mode to get a comprehensive
overview of your analyzer’s capabilities.
The Trigger and Filter settings dialog allows you to set the parameters for triggering on
selected triggers and filtering in (including) or filtering out (excluding) selected patterns.
The dialog box opens with default settings to capture everything on the bus. The analyzer
captures everything immediately without triggering on anything in particular.
2.7.1 Trigger Tab
You can drag and drop patterns from the Trigger Library pane into the Active Pane. You
can select the pattern and use the Add and Remove arrows to move patterns between
the Patterns Library and the Active pane (see Figure 2.41 on page 64 ). See “Trigger
Setup” on page 101. You can copy a frame from the spreadsheet view and paste it in the
Active Pane for triggering.
Figure 2.41: Trigger Settings Dialog.
Click the X icon to
delete
previously set
Trigger Filter Set-
tings
Click this
icon to Rename
Current Trigger
Capture Setting
Click the + icon to
use previously set
Trigger Filter
Settings
Include and Exclude arrows