Teledyne SierraNet M408, User Manual, Page: 199 / 248

SierraNet M408 Protocol Analyzer User Manual 191
InFusion Scenarios TeledyneLeCroy
1
Only shown in Action Properties dialog box when creating a sequence.
4.6.5 Available Resources
You can specify Events, Combined Events and Actions and additional Events. The
application automatically checks for the maximum number of terms (Events/Actions).
When you exceed the limit, an error is flagged, prompting you to jump to the place that
caused the error.
The list of available resources for Ethernet is given below:

Symbol Detector(each has its own Embedded counter) X 4

Auto ‐ Neg Detector X 4

Counter X 12

Frame Detector X 8

Timer X 8

Frame Jammer X 8

Symbol Substitute X 16

Aut ‐ Neg Jammer X 4

Capture DWORD slot X 8

Insert/Save frame slot (up to 16K bytes) X 7

Insert BYTEs/Symbols inside frame (up to 128 bytes) X 8

Global Action Register X 8

State per sequencer X 256

Action Register per state X 8
Usage of Action Register:

Each Counter in Global Rules = 1

Each Counter in State = 1

Each Timer in Global Rules = 2

Each Timer in State = 3

Other Actions = 1
The list of available resources for Fibre Channel is given below:

Symbol Detector (each has its own Embedded counter) X 4

Ordered ‐ set Detector (each has its own Embedded counter) X 8

Pattern (32bit) Detector (each has its own Embedded counter) X 12

Training Sequence Detector X 4

Counter X 12

Frame Detector X 8

Timer X 8

Frame Jammer X 8

Symbol Substitute X 4
Jammer Internal Triggers Refer to section “Synch Jammer Scenarios
with Jammer Internal Triggers” on
page 206.
Action Description